click to enlarge

ECC-Stand

Dockingstation for 5 Test Cells

The ECC-STAND docking station can accommodate up to 5 cells of the ECC series. By a simple movement of your hand, the test cell is connected to a battery tester or multi-channel potentiostat via a terminal box. A toggle switch serves to switch between two- and three-electrode operation. The ECC-STAND docking station thus allows for a permanent connection between a given tester channel and the corresponding cell position inside the stand, thereby helping to prevent the common wiring trouble and risk of failure when operating multiple cells in parallel.

The ECC-STAND can be wall-mounted, placed inside a temperature chamber, or simply sit on the bench top.

Features

  • Accommodates up to 5 cells of type ECC-STD, ECC-REF or ECC-AQU
  • Stand can either be wall-mounted, placed on the bench, or inside a temperature chamber. Up to 4 stands (20 cells) can be placed inside any temperature chamber of the 53 liters Binder series (e.g., Binder BG53). Adaptation to many other environments is possible on request.
  • Shielded connection cables with pair-wise twisted sense and current lines for low parasitic impedance
  • Two 15-pole SUB-D connectors for connection towards Terminal Box
  • Operating conditions: Temperature -20 to +70 °C, humidity non-condensing
  • Each cell position is equipped with a toggle switch to change between cell voltage and electrode potential control

Technical Data

  • 150mm x 398mm x 160mm (height x width x depth)
  • weight appr.: 3.8kg

Installation Examples

placed inside temperature chamber, with terminal boxes wall-mounted
placed inside temperature chamber, with terminal boxes wall-mounted
docking station wall-mounted